Post-CMOS Integration

Enabling Additional Functionality Despite Tight Process Constraints

Preprocessed CMOS and ASIC wafers already contain sensitive structures whose functionality must be maintained throughout all subsequent processing steps. At the same time, additional electrical, mechanical, or packaging functions may require materials and processes that cannot be used in conventional CMOS lines or can only be used to a limited extent.

Material compatibility, the existing wafer topography, and the allowable thermal budget of the starting wafer are therefore critical. The post-CMOS process sequence must take these constraints into account from the outset.

Demand is increasing particularly for miniaturized sensors and microsystems in which electronics, MEMS, and packaging need to be integrated as compactly as possible.

Develop Post-CMOS Processes from Individual Process Steps to Complete MEMS Devices

Fraunhofer ISIT provides customized post-processing of preprocessed CMOS, ASIC, and semiconductor wafers. Depending on the application, we develop and combine microfabrication, MEMS, and packaging processes to implement the required additional functions.

The range of capabilities includes electrical redistribution, metallization, electroplated structures, passivation layers, solder masks, microbumps, and bonding and sealing structures. Aperture channels and deflection electrodes can also be added to preprocessed wafers.

In addition, ISIT implements complete MEMS devices and device arrays on CMOS substrates. This includes piezoelectric MEMS based on AlN and AlScN thin films.

Depending on the stage of development, we support feasibility assessments, develop customized process sequences, manufacture demonstrators and prototypes, and transfer suitable processes into pilot production.

 

Your Application. Our Post-CMOS Expertise.

Combining Microfabrication, MEMS, and Packaging on Preprocessed Wafers

Various microstructuring and packaging processes are available for post-CMOS integration. These include lithography, wet and dry etching, physical vapor deposition (PVD), gold metallization, and electroplating.

Additional process options include redistribution layers for electrical interconnects, conductor tracks, contact structures, passivation layers, solder masks, wafer bonding, and microbump formation.

For the integration of complete MEMS structures, piezoelectric thin films such as aluminum nitride (AlN) and aluminum scandium nitride (AlScN) with scandium concentrations of up to 40% can also be used. The process range extends through structuring and mechanical release of the sensor or actuator structures.

A key requirement is that all process steps are adapted to the preprocessed wafer. Materials, topography, and the allowable thermal budget therefore determine the specific process sequence.

ISIT provides cleanroom infrastructure for the post-processing of preprocessed wafers, including the use of gold, as well as expertise in microstructuring, electroplating, packaging, and wafer-level testing.

Compact Integration of Electronics, MEMS, and Packaging at Wafer and Chip Level

Post-CMOS integration is suitable for microsystems in which sensors, actuators, or packaging functions need to be directly integrated with CMOS or ASIC structures.

Depending on the application, the technology enables different forms of functional integration at wafer and chip level. Applications range from sensor and actuator systems to customized solutions for microsystem integration and packaging.

Multi-Beam Chip for Writing Complex EUV Masks

Challenge:

Manufacturing complex masks for extreme ultraviolet lithography requires a mask writer capable of controlling a very large number of electron beams individually and in parallel. This is essential for exposing fine patterns at high throughput.

Our Solution:

Fraunhofer ISIT developed the TROM2 chip together with IMS Nanofabrication. It combines micromechanical deflection structures with CMOS electronics and controls 262,144 electron beams in parallel.

Result:

The multi-beam chip enables the parallel exposure of complex mask patterns. The mask writer is used for masks applied in semiconductor manufacturing at the 5 nm technology node.

Leveraging Existing CMOS and ASIC Technology for New Functions

Post-CMOS integration builds on existing semiconductor structures. Additional functions can therefore be integrated after the original CMOS or ASIC manufacturing process and tailored to the specific application.

More Functions at Wafer and Chip Level

Additional electrical, mechanical, and packaging functions can be integrated directly onto preprocessed CMOS and ASIC wafers.

Compact System Integration

Directly combining different functions at wafer or chip level enables compact integration concepts and reduces external interconnect paths.

Additional Materials and Processes

The specialized process environment enables the use of additional materials such as gold, which can only be used to a limited extent in conventional CMOS lines.

Processes Tailored to the Starting Wafer

The process sequence is customized to the existing materials, topography, and allowable thermal budget of the respective wafer.

From Individual Process Steps to Complete MEMS Devices

The process portfolio ranges from individual process steps to the implementation of complete MEMS devices and device arrays on CMOS substrates.

From Feasibility Assessment to Pilot Production

ISIT supports development from feasibility assessment through demonstrators and prototypes to transfer into pilot processes.

Research Focus Areas

Learn more about the related research focus area:

E-Beam Mask Writing

Research Project

Learn more about our related research project:

TROM

Weitere Themen