Wafer-Integrated Precision Micromagnets

A Technology Gap Exists Between Thin Films and Conventional Permanent Magnets

Permanent magnets generate static magnetic fields without requiring a continuous power supply. However, many miniaturized sensors and microsystems require magnets with dimensions between those of conventional permanent magnets and hard-magnetic thin films.

Permanent magnets with dimensions ranging from a few tens of micrometers to approximately one millimeter are particularly difficult to manufacture and position precisely using established processes.

Miniaturization Increases Assembly Requirements

In Hall or magnetoresistive sensors, small permanent magnets are often manufactured separately and subsequently integrated into the sensor package. As component dimensions decrease, the requirements for precise positioning and assembly increase.

This becomes particularly challenging when multiple magnets need to be precisely aligned with each other to generate a defined magnetic field distribution.

Quantum Sensors Require Highly Precise Magnetic Fields

Quantum sensors based on nitrogen-vacancy centers in diamond - so-called NV centers - place even higher demands on their supporting magnetic field.

For these sensor systems, the goal is to achieve a field homogeneity of 0.1% over a volume of 0.1 to 1 mm³ with an angular error of the magnetic field vector of less than 1°.

The precise and reproducible generation of such a field in a small space has thus become a key technological challenge in its own right.

Define Magnet Geometry and Position Directly on the Wafer

With PowderMEMS®, we integrate three-dimensional permanent magnets directly into microstructured silicon or glass substrates. The shape and position of the resulting magnet are defined by the geometry of a microcavity.

Photolithography and microfabrication processes enable large numbers of cavities to be produced in parallel on a wafer with high geometric precision.

 

Evaluate Micromagnet Integration for Your Application

 

Powder-Based Manufacturing Bridges the Size Gap

The cavities are filled with fine hard-magnetic powder. The powder particles are then bonded together at low temperatures using atomic layer deposition (ALD).

This enables the fabrication of three-dimensional magnetic structures with dimensions between those of conventional magnets and thin magnetic films.

Produce Complete Magnet Arrays Without Individual Assembly

Not only individual magnets but also multiple magnetic structures can be positioned relative to each other using lithographic processes.

This enables complete arrays to be fabricated directly on the wafer, eliminating the need for subsequent high-precision alignment of individual magnetic components.

Tailor Development to the Application

For industry partners, micromagnets and magnet arrays made from suitable hard-magnetic powders can be developed and fabricated on silicon and glass substrates.

Development activities can include the design of magnet geometries, integration into the respective device, and investigation of magnetic properties and long-term behavior.

Combine MEMS Processing with PowderMEMS®

Magnet geometries are defined within the substrate using standard MEMS and semiconductor manufacturing processes. They are then filled with hard-magnetic powder using PowderMEMS® and stabilized by atomic layer deposition.

Depending on the application, additional microassembly, characterization, and packaging processes can follow.

Use Silicon and Glass as Substrates

The technology enables the fabrication of integrated micromagnets on silicon and glass substrates.

This allows magnet integration to be combined with different microsystem and sensor architectures.

Provide Precise Magnetic Fields Directly at the Device

The closer the magnetic field source is positioned to the functional device, the more important a defined position and specifically designed field distribution become. Wafer-integrated micromagnets provide new integration possibilities, particularly for applications requiring compact dimensions and reproducible local magnetic fields.

Precise Magnetic Fields for Compact Sensors and Microsystems

Wafer-integrated micromagnets are particularly relevant for applications in which a local permanent magnetic field needs to be precisely positioned relative to the functional device.

Hall Sensors

Together with Fraunhofer IIS, integrated bias magnets for Hall sensors were investigated.

The magnet is integrated directly with the sensor structure and provides the local magnetic field required for the measurement function.

Magnetoresistive Sensors

Integrated permanent magnets for magnetoresistive sensors were implemented together with Sensitec.

The PowderMEMS® structures replace separately assembled magnetic components and enable direct integration at the device level.

Quantum Sensing

NV-based quantum sensors require extremely precise and stable magnetic bias fields.

Wafer-integrated magnet arrays provide an approach for considering the required field geometry during sensor development and providing it in a compact configuration directly adjacent to the sensor.

 

Magnetic MEMS

Actuators and other MEMS can also benefit from integrated permanent magnets, for example when forces need to be transferred without contact and without a continuous power supply.

Precise Integration Creates New Possibilities for Compact Magnetic Systems

Wafer-based manufacturing combines precisely defined magnet geometries with direct device integration. This enables micromagnets to be tailored to the specific application and reproducibly integrated into compact sensors and microsystems.

Combine Precision and Magnet Integration in a Wafer-Level Process

PowderMEMS® transfers the geometric precision of microfabrication processes to three-dimensional permanent magnets. This allows magnet shape and position to be defined during chip design and multiple structures to be fabricated in parallel.

Reduce Assembly Effort

Micromagnets do not have to be individually positioned and assembled as separate components.

This reduces the complexity of subsequent assembly, particularly for magnet arrays with multiple magnets that must be precisely aligned relative to each other.

Tailor Magnetic Fields to the Application

The shape, dimensions, and relative positions of the micromagnets are determined by the substrate structures.

This enables magnet configurations to be tailored to the magnetic field distribution required by the sensor or microsystem.

Use Magnetic Materials Efficiently

The magnetic material is specifically incorporated into the required microstructures. Unused powder can be reused.

This allows for more efficient use of materials, particularly in the case of hard magnetic materials containing rare earth elements.

 

Wafer-Based Manufacturing Enables Scalability

Large numbers of magnetic structures can be fabricated in parallel on a wafer. This combines precision micromagnets with a manufacturing approach that can be scaled toward higher production volumes.

Research Projects

Learn more about the related research project: