Solid-state transformers make power interfaces controllable, flexible, and ready for DC grids

Increased Grid Capacity Through Actively Controlled Power Electronics

Conventional 50/60-Hz transformers are designed for long service life and high efficiency. However, their core function remains largely passive: they transform voltages at a fixed ratio and do not themselves provide active control or integrated diagnostics.

At the same time, the way power grids are used is changing. Decentralized photovoltaic systems feed energy into the grid, electric vehicles and heat pumps create new peak loads, and energy is increasingly flowing in both directions. This can lead to voltage spikes, imbalances, and reverse power flow.

Traditional grid expansion using more powerful transformers and lines is possible, but it requires time and significant investment. Solid-state transformers (SSTs) take a different approach: power electronics supplement or replace the passive grid interface, making the flow of energy actively controllable.

As a result, SSTs can also become a key technology for medium- and low-voltage direct current (DC) grids, to which DC consumers and generators are directly connected.

From Power Semiconductors to Grid Control: Holistic Development of Solid-State Transformers

Solid-state transformers integrate power electronics, magnetic components, control systems, and power supply technology into a complex overall system. That is why we develop and study both hardware and software in tandem. We use a modular, three-stage architecture as a reference, with each individual stage being studied specifically for its respective function.

Jointly Advancing Power Electronics and Topology

One area of focus is on new converter architectures and their interaction with modern semiconductors and magnetic components. To this end, we are investigating, among other things, gallium nitride (GaN) devices as well as galvanically isolated intermediate-frequency stages with planar transformers.

Actively Control the Network Interface

For the medium-voltage side, we are investigating modular multistage converters as active grid interfaces. Our focus is on hardware, control, and multi-objective control methods, as well as additional grid services.

Our research includes, among other things, grid compliance, dynamic capacity provision, and behavior during grid faults.

Considering the Reliability of Hardware and Control Systems Together

Reliability is a key research question, as solid-state transformers consist of numerous power electronic components.

We are therefore investigating fault tolerance through redundancy and optimized topologies, condition monitoring, as well as digital twins and data-driven methods. In addition, we are researching active thermal control methods to specifically influence the load on individual components.

Integrate storage directly into the energy infrastructure

Batteries and supercapacitors are considered part of the system architecture. Specifically for data centers, we are investigating the integration of energy storage systems at the rack level and their interaction with power supply, control, and monitoring.

From semiconductor technologies to grid integration

The development of solid-state transformers requires a holistic approach, from individual components to behavior within the electrical grid. To this end, the research combines semiconductor technology, power electronics, magnetic components, control systems, and system testing.

The research environments used include:

  • Fraunhofer ISIT’s cleanroom infrastructure,
  • power electronics laboratories shared with Christian-Albrechts-University of Kiel,
  • power hardware-in-the-loop test environments,
  • AC and DC microgrids for system integration, and
  • field tests conducted as part of research projects.

Three-tier architecture as a research platform

A modular, three-stage SST architecture is considered for the investigations.

Level 1: Active Medium-Voltage Grid Interface

A modular multilevel converter (MMC) with a capacity of up to 500 kVA at 10 kV forms the active medium-voltage stage. Research focuses on internal and external fault handling as well as grid compliance.

Stage 2: Galvanically Isolated DC-DC Converter

The second phase examines multiport power converters, GaN-based power electronics, and operation with serial inputs and parallel outputs. Research focuses on the stability of DC power grids and active thermal control.

Stage 3: Low-Voltage Inverter

For the low-voltage stage, two-level and three-level converters with capacities up to 500 kW have been developed. Research is being conducted on grid-forming and grid-following control methods, as well as active thermal control.

A transformer platform for power grids, data centers, and new energy infrastructures

Controllable AC/DC and DC/DC conversion makes solid-state transformers an attractive option for various energy infrastructures. Applications in which galvanic isolation, flexible voltage adjustment, DC connectivity, and active grid support are all required are particularly relevant.

Power Grids and Direct Current Distribution

Solid-state transformers can connect AC power grids to medium- and low-voltage DC systems. The focus is on grid compliance, active grid support, and the stability of AC and DC systems.

Research in this area is being conducted, among other places, at DC-KORE for medium-voltage DC grids and at Start-GFM for grid integration.

Data Centers

Data centers place high demands on power density, power quality, and reliability. SST architectures offer the potential to integrate different voltage levels and DC components directly into the power supply.

These issues are addressed in projects such as Super-HEART and BRICS, among others.

Renewable Energy and Hydrogen

Renewable generation, storage systems, and electrolyzers have different electrical interfaces. SST-based architectures can interconnect multiple AC and DC levels.

A corresponding application scenario is being investigated in the OCEAN-H2 project.

Maritime Energy Systems

Ships, too, are increasingly requiring flexible power electronics-based power distribution. Applications in maritime power systems are being examined in the context of the STEESMAT and Re-SCHIFF projects.

Actively controlling grid interfaces rather than merely transforming energy

The key difference from a conventional transformer lies in the active power electronics. It expands beyond simple voltage conversion to include control, diagnostic, and grid functions, while also opening up new possibilities for integrating direct current systems.

Actively Control Voltage and Power Flow

SSTs enable continuous, bidirectional control. This allows the grid interface to respond dynamically to changing feed-in and load conditions.

Connect AC- and DC-Systems Directly

Additional DC connections enable the direct integration of photovoltaic systems, battery storage systems, charging infrastructure, or other DC components. Medium- and low-voltage DC grids can thus become part of the same energy architecture.

Integrate Network Services

In addition to power transmission, SSTs can perform functions such as reactive power supply, harmonic isolation, fault current limitation, and grid-forming and grid-following control.

Making Conditions Visible

Integrated condition monitoring allows for a more detailed analysis of individual components. Digital twins and data-driven methods are being explored to further advance condition assessment and reliability.

Responding to New Requirements with a Modular Approach

Modular architectures make it possible to customize performance and functionality by adding additional modules. Redundant structures can also help ensure that a system can continue to operate in a controlled manner even in the event of partial failures.

More Compact Electrical Isolation

Electrical isolation is achieved using a medium-frequency transformer instead of a conventional 50/60-Hz transformer. The higher operating frequency allows for a more compact magnetic component.

Techline

Entdecken Sie unsere thematisch zugehörige Techline:Discover our related Techline:

Grid-Compliant Solid-State Transformers for Stable and Flexible Hybrid AC/DC Networks

Research Project

Learn more about our related research projects:

STEESMAT

Weiteres

Das könnte Sie ebenfalls interessieren:

BRICS - Projektwebsite