Epi-poly-silicon for multilayer MEMS

Complex MEMS Require More Than One Functional Layer

Depending on their function, MEMS for inertial sensing, micromirrors, and other actuator and sensor applications require large moving masses or particularly stiff mechanical structures. However, conventional low-pressure chemical vapor deposition (LPCVD) polysilicon processes can economically produce only relatively thin functional layers. Silicon-on-insulator (SOI) wafers provide thicker silicon layers but limit the design to a single functional layer.

Complex three-dimensional MEMS present an additional challenge. For example, when the actuator and functional surface need to be located on separate levels, single-layer process concepts offer only limited design flexibility.

At the same time, mechanical stress within the layers affects device performance. Precise control of this stress is therefore particularly important for sensitive or large-area MEMS structures. Hermetic packaging presents additional requirements, as different cavity pressures may be needed depending on the device function.

Develop and Integrate Thick, Multilayer MEMS Structures

With the PSM-X2 technology platform, Fraunhofer ISIT develops and manufactures MEMS with thick epitaxial polysilicon functional layers. Epitaxial polysilicon refers to polycrystalline silicon deposited in an epitaxial reactor. This enables functional layers from 2 to 140 µm as well as multilayer systems for three-dimensionally movable MEMS structures.

Multiple epitaxial polysilicon layers allow different functions to be arranged on separate levels within the device. For example, the actuator and functional surface can be designed independently of each other.

The platform can be combined with hermetic wafer-level packaging, including getter materials. For applications with different damping requirements, a patented multi-pressure wafer-level packaging technology is also available. This enables different cavity pressures to be implemented on a single chip.

 

Discuss Collaboration Opportunities for Epitaxial Polysilicon MEMS

 

 

Precisely Produce Layer Thicknesses of Up to 140 µm in an Epitaxial Reactor

 

The functional layers are deposited in the epitaxial reactor as doped, low-stress epitaxial polysilicon. The available layer thickness ranges from 2 to 140 µm. Multi-layer combinations such as 2 × 30 µm, 2 × 40 µm, or 11 µm + 30 µm enable the fabrication of complex MEMS structures with multiple functional levels.

With an integrated getter, internal pressures of up to 10⁻⁶ bar are possible. For different functional requirements within a single chip, the patented multi-pressure wafer-level encapsulation can provide various cavity pressures.

For development and pilot production, ISIT has an 8-inch pilot line available in its own cleanroom.

From Inertial Sensors to Micromirrors: Epitaxial Polysilicon for a Range of MEMS Applications

Thick and multilayer epitaxial polysilicon structures enable MEMS with large moving masses, stiff functional surfaces, or multiple mechanical levels. This provides a basis for a variety of sensor and actuator concepts as well as complex MEMS structures.

At ISIT, implemented examples include a vacuum-packaged 1D scanner with a 3D glass lid, IMU demonstrators, and energy-harvester prototypes. Another example is an electrostatic 2D scanner with two epitaxial polysilicon layers.

Piezoelectrically actuated MEMS devices using aluminum nitride (AlN) or aluminum scandium nitride (AlScN) on epitaxial polysilicon cantilevers have also been demonstrated.

Additional potential applications include microphones, resonators, timing devices, and actuators for microfluidic systems.

Thick Functional Layers for Higher Sensitivity

Epitaxial polysilicon functional layers with thicknesses of up to 140 µm enable large moving masses. In inertial sensors, larger masses can increase sensitivity and reduce noise.

Multiple Functional Levels on a Single Chip

Multilayer epitaxial polysilicon systems enable MEMS structures with separate mechanical levels. This allows, for example, the actuator and functional surface to be designed independently and multiple functions to be integrated within a compact device.

Precise Control of Mechanical Stress

Mechanical stress within the epitaxial polysilicon layers can be precisely controlled. This supports the implementation of precise mechanical structures, such as stiff mirror plates.

Defined Conditions in Hermetic Cavities

Hermetic wafer-level packaging protects the MEMS structures and enables defined cavity conditions. Multi-pressure technology allows different pressures to be implemented for different functions on the same chip.

MEMS Manufacturing Without an In-House Pilot Line

Industry and project partners can use ISIT's 8-inch pilot line and MEMS process expertise. Services range from feasibility studies and process development to prototypes and pilot production.

Standard Silicon Instead of SOI Wafers

Epitaxial polysilicon surface micromachining enables thick functional layers on standard silicon wafers while providing multiple functional levels. This offers an alternative to MEMS concepts based on silicon-on-insulator wafers.