3D Glass Molding and Hermetic Packaging for Compact Optical Microsystems

Hermetic Protection and Reflection-Free Optics Despite Increasing Miniaturization

Optical microelectromechanical systems (optical MEMS) require unobstructed optical access while also providing reliable protection against moisture, contamination, and other environmental influences. Typical applications include micromirrors, laser diodes, detectors, and optical sensors.

Plane-parallel cover glass can cause unwanted reflections within the field of view or measurement area. In projection systems, for example, these reflections may appear as bright spots in the image. In LiDAR systems and optical scanners, reflections and wavefront distortions can compromise measurement accuracy. Specially designed window geometries are therefore essential, particularly at large deflection angles.

Assembly also presents significant challenges. Hybrid assemblies with individually mounted windows or lenses are labor-intensive and offer limited potential for automation. Manual assembly can account for a substantial proportion of component costs. At the same time, conventional manufacturing processes make it difficult to produce precision domes, angled windows, and lenses reproducibly at high volumes.

As miniaturization advances, requirements for thermal management and mechanical stability also become more demanding. Optical modules for augmented reality systems, laser projection, and LiDAR must be compact, lightweight, and robust. Outgassing from organic materials must not contaminate optical surfaces. Thermomechanical stresses between dissimilar materials must also be minimized.

Modular Glass-Silicon Platform for Customized Optical Packaging

Fraunhofer ISIT is developing a modular glass-silicon platform for the packaging of optical microsystems. Structured silicon wafers serve as mechanical carriers and precision optical benches. Three-dimensionally formed glass wafers provide optical windows, domes, lenses, and package lids.

The platform can be configured to meet the requirements of individual applications.

Possible elements include:

  • Planar or angled optical windows
  • Glass domes and hermetic glass caps
  • Lenses and lens arrays
  • Spherical micromirrors
  • Electrical through-wafer interconnects
  • Alignment structures
  • Integrated getter structures for binding residual gases
  • Structures for direct optical fiber coupling

Angled windows and glass domes redirect unwanted reflections away from the optical field of view. Wafer-level manufacturing allows numerous components to be processed in parallel under comparable process conditions. This reduces individual assembly effort and improves reproducibility.

Fraunhofer ISIT develops and manufactures optical components on 8-inch glass wafers. Glass caps and optical geometries can be customized to meet specific customer requirements. The range of services includes contract research, development projects, publicly funded collaborative projects, and pilot-scale and small-batch manufacturing. Licensing models can also be explored for proprietary processes.

 

Develop a Customized Packaging Solution Together

 

3D Glass Forming and Hermetic Wafer-Level Packaging in an Integrated Process Flow

Viscous Glass Hot Forming at the Wafer Level

In viscous glass hot forming, a borosilicate glass wafer is bonded to a structured silicon wafer and heated. The glass is softened to the point where a deliberately controlled pressure differential draws it into or out of cavities. This process enables the direct formation of three-dimensional glass domes, angled windows, lenses, and micromirrors at the wafer level.

The silicon structure defines the final glass geometry and serves as the forming tool. Optical surface quality is achieved during the forming process itself, eliminating the need for additional polishing steps. The thermal expansion properties of the glass are matched to those of silicon, helping to minimize thermomechanical stress within the bonded assembly.

For an optical dome, window thicknesses of approximately 160 micrometers have also been achieved with an internal cavity height of 725 micrometers.

Hermetic Encapsulation

The glass caps are joined to the silicon substrate using hermetic bonding processes. Depending on the device, encapsulation takes place under vacuum or in an inert protective gas atmosphere.

A vacuum reduces gas damping, thereby supporting the motion of resonantly operated MEMS micromirrors. Integrated getters can bind residual gases inside the package. For laser diodes, an inert atmosphere protects optical and electrical components from harmful environmental influences. The achievable hermeticity must be characterized for each specific package design.

Silicon as an Optical Bench

Structured silicon substrates serve as precision mounting platforms for active and passive optical components. Potassium hydroxide (KOH)-etched cavities enable precise component placement and electrical contacting. V-grooves provide accurate alignment of optical fibers with the optical system. Vertical electrical through-wafer interconnects support compact electrical connections and surface-mountable package designs.

Flux-Free Laser Direct Soldering

Bare-die laser diodes can be mounted onto gold-tin solder pads using localized laser direct soldering. The solder consists of alternating deposited layers of gold and tin. The laser selectively heats the bonding area, limiting the thermal load on adjacent components.

The process does not require flux. This prevents organic flux residues from entering the package and subsequently outgassing, which could otherwise degrade optical surfaces. Tests have been conducted using solder pads with a spacing of 100 micrometers.

Active Optical Alignment

During active lens assembly, the optical system is operated throughout the alignment process. Sensors measure focus, beam profile, or intensity. The lens is moved with micrometer precision until the desired optical signal is achieved. It is then permanently fixed in place.

From Smart Glasses and LiDAR to Quantum Sensing

The glass-silicon platform is suitable for compact optical systems that require high precision, hermetic protection, and a well-defined optical path. Relevant industries include photonics, automotive engineering, consumer electronics, sensor technology, and quantum technology.

Optical Wafer-Level Package with a Defined Internal Atmosphere for MEMS Scanners

Challenge:

Optical micromirrors require a transparent enclosure with a defined internal atmosphere. In laser scanners, reflections from the glass lid can appear as bright spots in the projected image. At the same time, sufficient clearance must be provided for the moving component.

Our Solution:

Fraunhofer ISIT manufactures tilted and dome-shaped glass lids using three-dimensional micromachining at the wafer level. The geometry redirects reflections away from the projected image. Smooth surfaces reduce stray light. During wafer bonding, a defined atmosphere can be enclosed, such as a vacuum to minimize gas damping.

Results:

The solution enables wafer-level encapsulation of optical MEMS while combining mechanical clearance with low light scattering and a defined internal atmosphere. 

Glass Domes for Hermetic Encapsulation of Optical MEMS Mirrors

Challenge:

Moving MEMS mirrors require substantial mechanical clearance and a particle-free vacuum or inert gas atmosphere. Flat covers can limit the deflection angle and cause optical distortions.

Our Solution:

Fraunhofer ISIT developed a glass flow process for manufacturing optical glass domes on full 200 mm wafers. The dome geometry prevents contact with the mirror edges and enables hermetic encapsulation.

Results:

The process has been used to manufacture large numbers of glass domes at the wafer level. Optical distortions of less than 100 nm RMS have been reported for a large field of view. Hermetic bonding can maintain a vacuum above the MEMS mirror.

Super-Smooth Spherical Mirrors for Laser Resonators

Challenge:

Laser resonators require extremely smooth spherical mirrors. Achieving reflectivity above 99.999% and scattering losses below 1 ppm typically requires complex polishing and ion-beam processes.

Our Solution:

Fraunhofer ISIT uses a contactless glass flow process to manufacture spherical optical surfaces across entire wafers. The non-contact forming process produces exceptionally smooth surfaces that can subsequently be coated with reflective materials.

Results:

The glass flow process has been used to manufacture mirrors with surface roughness below 0.6 nm RMS. Individual measurements have demonstrated values below 0.5 nm RMS. Wafer-based manufacturing enables multiple mirrors to be produced in a single process.

Miniaturized RGB Laser Light Source for Smart Glasses

Challenge:

A fast-switching, compact red-green-blue (RGB) laser light source was required for sports smart glasses. Its light was to be coupled into transparent waveguides integrated into the lenses via miniaturized MEMS mirrors.

Our Solution:

Fraunhofer ISIT developed a wafer-level integration platform for the hermetic encapsulation of active laser diodes. The silicon wafer serves as an optical bench. From Generation I to Generation III, the number of optical components was reduced and the package volume decreased from 484 mm³ to 11 mm³.

Results:

The laser light source demonstrates imaging laser projection for smart glasses. Its volume was reduced by approximately 98%. Generation III has a longest edge of 4.5 mm, compared with 11 mm for Generation II.

Other potential applications:

Augmented Reality and Laser Projection

Miniaturized RGB laser sources can provide light for laser beam-steering systems. In these systems, a micromirror precisely deflects the laser beam. The platform supports compact modules for pico-projectors, augmented reality glasses, and retinal projection systems.

An RGB laser engine has already been developed using free-space beam propagation and lateral beam output coupling through a three-dimensionally formed glass cap.

LiDAR and Optical Scanners

Curved or angled glass caps protect MEMS scanning mirrors while keeping unwanted reflections outside the field of view. This is particularly relevant for LiDAR systems and two-dimensional scanners with large deflection angles. Scanner packages have been integrated into LiDAR and augmented reality demonstrators.

Lasers, LEDs, and Detectors

The technology is suitable for laser diodes, vertical-cavity surface-emitting lasers (VCSELs), light-emitting diodes (LEDs), and photodiodes. Hermetic packages protect these devices while providing defined optical access. Further potential applications include edge-emitting high-power lasers and multichannel laser light sources.

Sensors and Micro-Optics

Other potential applications include micro-opto-electromechanical gas sensors, microcuvettes, lens arrays, and customized photonics modules. Glass waveguides integrated into silicon and V-grooves also enable optical assemblies with direct fiber coupling.

Quantum Technology

Preformed glass caps and optical glass enclosures offer potential applications in quantum optical systems. These include Rydberg atom-based quantum sensors and ultra-smooth glass reflectors for laser sources or quantum optical cavities. These applications should be considered future development areas or fields requiring further technological development.

More Optical Performance in Less Space

Reduced Reflections in the Optical Field of View

Angled windows and glass domes redirect unwanted reflections away from the optical field of view. This provides improved conditions for clean projections and precise optical measurements. The three-dimensional glass caps enable mirror deflection angles exceeding ±15 degrees without the central reflections typically caused by plane-parallel cover glass.

Compact Integration

Vertical silicon through-wafer interconnects, structured optical benches, and surface-mountable package designs reduce the required installation space. This enables optical, electrical, and mechanical functions to be combined in compact modules.

Reproducible Wafer-Level Manufacturing

Windows, domes, lenses, and other structures are manufactured in parallel on a single wafer. Compared with individual component assembly, this approach reduces manual process steps and improves reproducibility. It also provides a basis for transferring processes to pilot-scale and small-batch manufacturing.

Hermetic Protection

Encapsulation under vacuum or in a protective gas atmosphere safeguards sensitive optical and micromechanical components. Flux-free joining processes prevent organic residues that could outgas inside the package and contaminate optical surfaces.

High-Precision Optical Surfaces

Glass hot forming achieves surface roughness below 1 nanometer Ra. For windows with a diameter of 3.5 millimeters, deformation values below 100 nanometers have been reported. Optical surface quality is achieved without subsequent polishing.

Thermal Management and Mechanical Stability

Silicon provides an effective thermal path for dissipating heat generated by optical and electronic components. Direct solder connections and carefully matched materials can also help minimize mechanical stress within the package.

Development Without an In-House Manufacturing Line

Industrial partners gain access to Fraunhofer ISIT's 8-inch pilot line and expertise in glass forming, micro-optics, and hermetic packaging. Projects can be supported from initial feasibility studies and process development through to pilot-scale and small-batch manufacturing.

 

Discuss Your Optical Packaging Requirements

 

 

Research Projects

Learn more about our related research projects:

InWave