Lithography

Designing Lithography Processes to Be Precise and Reproducible

Lithography precisely reproduces mask patterns in photoresist on wafer surfaces, with or without existing topography, and lays the foundation for subsequent etching, deposition, electroplating, or lift-off processes. Key challenges include controlling and maintaining the critical feature width across the entire wafer, achieving high reproducibility from wafer to wafer, and ensuring highly accurate alignment of different lithography layers. At the same time, both thin and thick resist layers must be applied uniformly and completely cover a wide variety of topographies. Substrates made of specialty materials such as glass, GaN, or SiC also place special demands on coating, alignment, and exposure. The goal is consistently stable, reproducible, and integrable pattern transfer. Deviations in CD, overlay, or resist thickness can distort geometries, shift functional layers, and thereby impair overall functionality, process yield, and transferability.

What We Offer

  • Optical i-line stepper lithography with 1:2 and 1:5 projection.
  • Contact and proximity exposure with a mask aligner, including front- and back-side alignment.
  • Spin and spray coating; positive and negative resists; thin and thick resists.
  • Multilayer lithography, lift-off, high-resolution, and thick resist processes.
  • Additional services: process and recipe development, resist selection, dose/focus optimization, process integration, CD/overlay characterization, profilometry, prototyping, and technology transfer.

Equipment & Technology

Process step

Equipment

Features

Coating / Developing

SVG 90;

SÜSS ACS200

Automated spin coating; ACS200 additionally equipped with spray coating as well as bake, cool, and development modules

Stepper

Canon FPA-3000iW;

Canon FPA-3030i5+

i-line; 1:2 (CD: ~800 nm) and 1:5 (CD: ~300 nm) projection;

FPA-3030i5+ with IR and back-side alignment

Mask Aligner

SÜSS MA200 Compact

Contact/Proximity;

Front- and back-side alignment (CD: 1 µm)

Metrology

Hitachi 9260 CDSEM;

KLA Archer XT+

CD and overlay metrology for 200-mm wafers

Bake

Hotplates;

Heraeus Oven; Despatch Oven

Ovens up to 230°C and 300°C, respectively, according to the supplementary document

Use Cases

  • Optimized thin-film resist processing for submicrometer feature widths at the resolution limits of existing stepper exposure systems.
  • Thick-film or multilayer resist processing for the fabrication of electroplated structures up to 80 µm in height and with high aspect ratios.
  • Lithography on high topographies using spray or multiple spin coating.

Advantages

  • A tailored suite of services encompassing coating, exposure, development, and metrology.
  • Integration with on-site deposition, etching, and lift-off processes.
  • A broad portfolio of resists and substrates for MEMS, III-V, post-CMOS, and packaging applications.
  • Individual processes, process development, and integrated process chains—all from a single source. A coordinated portfolio of coating, exposure, development, and metrology services.
  • Integration with on-site deposition, etching, and lift-off processes.
  • A broad portfolio of resists and substrates for MEMS, III-V, post-CMOS, and packaging applications.
  • Individual processes, process development, and integrated process chains—all from a single source.