Porous 3D Microstructures for High-Performance Sensor and Analysis Systems

Integrating large active surface areas into the smallest possible space

The performance of many sensors, analytical systems, and catalytic converters depends on their active surface area. However, as devices become increasingly miniaturized, the available surface area decreases. Porous microstructures address this challenge by providing a large internal surface area within a very small footprint.

Integrating such structures into commercial products poses specific manufacturing requirements. The porous material must be produced reproducibly and reliably integrated into the respective microsystem. At the same time, the processes must be suitable for high-volume production and compatible with established manufacturing processes.

These requirements are particularly relevant for manufacturers of miniaturized sensors and fluidic microsystems such as lab-on-a-chip systems. The growing demand for compact sensor and analytical solutions affects areas including medical and healthcare technology, environmental monitoring, robotics, and autonomous systems.

PowderMEMS combines porous structures with microsystem manufacturing

Using PowderMEMS, Fraunhofer ISIT develops and manufactures porous microstructures on silicon and glass substrates. The process enables defined pore sizes in the submicrometer and micrometer range and can be combined with established microsystem and semiconductor manufacturing processes.

In addition to manufacturing individual PowderMEMS structures, ISIT develops complete microsystems in which the porous structures are functionally integrated. Depending on the requirements, properties such as porosity, surface wettability, and thermal, electrical, magnetic, or catalytic functionality can be specifically tailored.

Our services include the development of application-specific structures, their characterization, and the production of prototypes and small series. In this way, ISIT supports industry partners in transferring new concepts into functional microsystems that are compatible with established manufacturing processes.

 

Explore potential applications for PowderMEMS

Monolithically integrated porous structures with tunable properties

PowderMEMS is a generic process for integrating thick, porous 3D microstructures with a large internal surface area. The structures are fabricated directly on silicon or glass substrates. Their pore size and functional properties can be tailored to the requirements of the respective application.

The manufacturing and analytical capabilities available at Fraunhofer ISIT cover the entire process chain, from the fabrication and functionalization of porous microstructures to their integration and characterization in complex microsystems.

 

Porous microstructures for analysis, separation, and sensor protection

Porous PowderMEMS structures are suitable for applications that require a large active surface area within a small footprint. These include, in particular, miniaturized sensors, microfluidic systems, and lab-on-a-chip platforms for analytical and diagnostic applications.

The use of PowderMEMS structures has already been demonstrated in a variety of applications:

  • Liquid chromatography: In the internal ISIT project MiChroChip, porous structures were integrated as chromatographic columns on a chip. The separation effect was successfully demonstrated.
  • Molecular diagnostics: In the state-funded OptoChip project, PowderMEMS structures were used to extract DNA from saliva samples.
  • Microfluidic systems: In collaboration with X-FAB, porous structures were demonstrated to improve the wettability of fluidic ports in lab-on-a-chip systems.
  • Particle protection for sensors: Demonstrators have shown the use of porous protective caps that allow gases or liquids to pass through while protecting sensitive sensors from particle contamination.
  • Gas sensing: Protective caps with an integrated catalytic ozone filter were developed to reduce poisoning of sensitive gas sensors.

The technology is particularly relevant for manufacturers of sensors, microfluidic systems, diagnostic platforms, and other microsystems that require a large functional surface area combined with a compact design.

More functionality in less space and direct integration into industrial manufacturing processes

More active surface area in the smallest possible space and compatible with MEMS manufacturing

PowderMEMS combines the advantages of porous materials with established MEMS and semiconductor manufacturing processes. This enables high-performance microstructures to be integrated directly into microsystems.

Large active surface area despite miniaturization

Porous microstructures provide a significantly larger internal surface area without increasing the required footprint. This can improve the performance of sensors, analytical systems, and catalytic systems.

Compatible with industrial manufacturing

The process is compatible with many established MEMS and semiconductor manufacturing processes. This allows PowderMEMS structures to be integrated into existing manufacturing workflows and provides a pathway toward higher-volume production.

Customizable Material Properties

Porosity, wettability, and thermal, electrical, magnetic, or catalytic properties can be tailored to the respective application. This enables the targeted development of application-specific microstructures.

From material to microsystem

Fraunhofer ISIT supports industry partners throughout the process, from the development and characterization of porous microstructures to the production of prototypes and small series.

Integrated rather than subsequently assembled functional elements

The monolithic integration of porous structures can reduce additional assembly and integration steps, simplifying the implementation of compact microsystems.

Research Focus

Learn more about the related research focus:

PowderMEMS®: Integrating Functional Materials into Microsystems

Research Projects

Learn more about our related research projects:
 

Collaboration Opportunities

 

  • Development of application-specific PowderMEMS structures
  • Characterization of porous microstructures
  • Prototype and small-series production
  • Feasibility studies for sensing, diagnostic, and microfluidic applications