Compact planar transformers for high-power power converters

Increasing Power in Less Space Places New Demands on Transformers

Wide-bandgap power semiconductors such as gallium nitride (GaN) and silicon carbide (SiC) enable higher switching frequencies and increasingly higher voltages. At the same time, the requirements for transformers and other passive components are increasing. Thermal and electrical stresses as well as parasitic effects must be considered from the initial design stage.

New applications such as data centers, hydrogen systems, and high-power supply systems are further increasing the demand for high currents and high power density. Compact, low-profile transformers are needed that can be manufactured reproducibly and designed for operation at medium to high frequencies.

Conventional transformer solutions are reaching their limits in these areas. Variations in parasitic characteristics make reproducible system design more difficult, while very high currents and use in future medium-voltage converters place additional demands on design, insulation, and cooling.

 

Discuss Requirements for Planar Transformers

 

Design Planar Transformers for Power, Space, and Operating Requirements

Fraunhofer ISIT develops planar transformers for compact, high-efficiency power electronics. One focus is on new transformer concepts with integrated cooling for high power density as well as solutions for low voltages and extremely high currents in the kiloampere range.

ISIT's approach goes beyond the individual transformer. Expertise ranges from the requirements of the specific application and the selection of active and passive components to the design and testing of the complete power converter, including its control system.

This enables transformers to be specifically developed and evaluated for medium-voltage applications, medium switching frequencies, low-profile designs, or high-current applications.

 

Develop a Planar Transformer for Your Application

 

Tailor Planar Transformers to Electrical and Thermal Requirements

Fraunhofer ISIT combines different development and characterization methods to adapt planar transformers to the requirements of the specific application. Electrical and thermal properties are considered together throughout the process, from modeling and simulation to experimental testing.

Integrated Cooling for High Power Density

For high-power-density applications, ISIT develops planar transformers with integrated cooling. Thermal design is incorporated directly into the development process and considered together with the electrical properties.

Multi-Objective Optimization for Application-Specific Designs

Analytical models and multiphysics simulations make it possible to consider different requirements together during development. Electrical and thermal properties as well as the form factor can therefore be specifically optimized for the respective application.

PCB-Based Design for Flexible Prototyping

An approach developed at ISIT is based on a standardized printed circuit board design. It enables flexible adaptation and reuse of layout structures, supporting the rapid development and manufacturing of different prototypes.

Targeted Optimization of Leakage Inductance

Leakage inductance is considered and specifically optimized during development. This also applies to multiwinding transformers and enables the design to be tailored to the requirements of the respective power converter.

Electrical and Thermal Characterization

ISIT investigates planar transformers, focusing, among other things, on their thermal and electrical properties. The electrical characterization includes small-signal and large-signal excitation tests as well as investigations into partial discharges.

Prototypes that have already been developed and tested achieve operating frequencies of up to 400 kHz and currents of 200 A and higher. In addition, transformers with multiple windings and high turns ratios have been built.

Planar Transformers for Compact, High-Power Energy Conversion

Planar transformers are suitable for applications that require high power transfer within limited space while also providing galvanic isolation. They therefore address requirements for compact designs, high power density, and high currents.

Relevant applications range from power supplies and battery charging technology to data centers, hydrogen systems, grid applications, and microgrids. The technology also offers potential for compact power supplies in consumer electronics.

Smaller, More Efficient, and More Highly Integrated

ISIT's MEMS and thin-film technologies support acoustic components that can achieve high performance despite their small size. Custom designs make it possible to tailor the frequency range, sensitivity, sound pressure, and radiation characteristics to the specific application.

 

 

High Efficiency for High-Power Converters

A 10-kW transformer designed for 400 V to 400 V achieves a measured efficiency of more than 99.6 percent at 50 kHz. This technology is therefore well-suited for applications where low losses during high-power transmission are critical.

Compact Transmission of High Currents

Planar transformers enable low-profile, compact designs for applications requiring high power density. ISIT also develops concepts for extremely high currents in the kiloampere range.

Controlled Parasitic Characteristics

The reproducible construction of planar transformers supports controlled design of parasitic electrical characteristics. Leakage inductance can be specifically optimized and incorporated into the overall design of the power converter.

Faster Development from Layout to Prototype

The PCB-based design approach enables existing layout structures to be reused and adapted. Different variants can therefore be implemented flexibly, shortening development cycles during prototyping.

Develop the Transformer and Power Converter Together

ISIT considers requirements from the transformer through to the complete power converter. Active and passive components, control, and thermal constraints can therefore be jointly optimized for the specific application.

Research Projects

Learn more about our related research projects:

BRICS

DC-KORE

Re-SCHIFF

Super-HEART

Downloads

Publication on Planar Transformers:

https://ieeexplore.ieee.org/document/11206572