Glass Technology for Microintegration and Optical Systems

Glass Is Increasingly Taking on Functional Roles in Microsystems

Glass is used in electronic and optoelectronic devices for more than just its transparency. Its electrical, mechanical, and optical properties make it possible to combine multiple functions within a single component.

Precisely Integrating Optical Functions

High transparency and precise surface quality are essential for lenses, mirrors, and optical windows. At the same time, glass offers high hardness, excellent durability, and a low coefficient of thermal expansion.

These properties make glass particularly suitable for miniaturized optical components, where the geometry and surface quality directly influence their functional performance.

Combining Electrical and Structural Functions

Glass's excellent insulating properties and low electrical losses at high frequencies also make it an attractive material for microelectronic substrates.

Vertical channels, for example, can serve as the basis for electrical feedthroughs. This creates new opportunities for interposers, highly integrated packaging concepts, and three-dimensional microsystems.

Enabling Hermetic Systems at the Wafer Level

Glass can be hermetically bonded to other materials while simultaneously providing optical access. This combination is particularly relevant for optical MEMS and other sensitive components.

Our research aims to leverage the diverse material properties of glass to enable integrated optical, electrical, and structural functionalities.

Three-Dimensionally Functionalizing Glass at the Wafer Level

Our research focuses on the fabrication of three-dimensional glass structures within wafer assemblies. Depending on the intended functionality, we pursue different technological approaches: laser-based structuring for channels and freeform geometries, and glass flow for high-precision optical surfaces.

Fabricating Fine Vertical Channels Using LIDE

For vertical channels and through-holes, we use Laser-Induced Deep Etching (LIDE).

Ultrashort laser pulses generated by a femtosecond laser locally modify the glass along the desired structure. The modified regions can subsequently be selectively removed using a wet chemical etching process.

This enables the fabrication of long, narrow, and nearly vertical channels extending through the glass wafer. These structures serve, among other purposes, as the basis for electrical feedthroughs.

Fabricating Complex 3D Structures Using SLE

For three-dimensional freeform geometries, we employ Selective Laser Etching (SLE).

In this process, the glass is also selectively modified using femtosecond laser pulses and subsequently etched. Unlike the LIDE process, SLE enables the fabrication of more complex three-dimensional structures within the glass substrate.

Forming Optical Surfaces Without Mechanical Contact Through Glass Flow

For the fabrication of lenses, concave mirrors, and glass caps, we employ a different approach.

First, a structured silicon wafer is hermetically bonded to a Borofloat 33 glass wafer. During this process, a defined gas pressure is trapped within the cavities.

The wafer assembly is then heated in a furnace until the glass softens. Depending on the pressure difference between the cavity and the surrounding furnace atmosphere, the glass is either drawn into the cavity or shaped outward from it.

As pressure equalizes, the surface tension of the glass produces a spherical surface. This shape is retained after cooling.

Further Functional Processing of the Structured Glass

Following the glass flow process, the remaining silicon wafer is removed. Depending on the intended application, the structured glass wafer can then undergo further processing, such as applying a reflective coating to the concave mirrors or integrating the structure as a glass cap.

Combining Laser Structuring and Glass Flow at the Wafer Level

Different process chains are available depending on the desired functionality. Laser-based and etching processes enable the fabrication of precise microstructures and feedthroughs. Wafer bonding and thermal glass flow, on the other hand, enable the fabrication of spherical optical structures with exceptionally smooth surfaces.

Structuring Glass Wafers Using LIDE

An automated femtosecond laser system and a fully automated etching station are available for the LIDE process.

The LPKF Vitrion S5000 Gen. II system used in this process enables the processing of:

  • 200-mm glass wafers
  • 300-mm glass wafers

For example, vertical through-holes with diameters of approximately 30 µm have been fabricated in a 500 µm-thick glass wafer.

Fabricating Three-Dimensional Freeform Structures Using SLE

For more complex three-dimensional glass structures, an SLE laser system from LightFab is available.

This complements the highly parallel via structuring capabilities of LIDE by enabling the fabrication of complex three-dimensional geometries within the glass.

Fabricating Optical Components Through Glass Flow

The glass flow process primarily utilizes a SUSS anodic wafer bonder and an Inotherm vacuum furnace system.

The process chain comprises the following steps:

Silicon structuring → anodic wafer bonding → defined cavity pressure → thermal glass flow → cooling → silicon removal

Achieving Ultra-Smooth Spherical Surfaces

 

The contactless shaping of the softened glass allows for very smooth spherical surfaces.

The following values were achieved for the mirrors produced:

  • Figure accuracy: better than λ/10 RMS
  • Surface roughness: below 0.5 nm RMS

The surfaces are characterized using techniques including laser profilometry and white-light interferometry.

Integrating Glass-Based Functionalities Where Precision Is Required in Limited Space

The developed processes address different functional properties of glass. Optical structures take advantage of the controlled shaping capabilities and surface quality of the material. Microchannels and vertical feedthroughs, in contrast, create new opportunities for electrical and three-dimensional integration.

Glass-Based Ion Traps with Integrated Electrical Feedthroughs

Background:

Ion traps for quantum computers must confine and manipulate ions using controllable electric fields. This requires numerous electrical and radio-frequency connections, as well as optical access, within a limited space.

Our Solution:

Fraunhofer ISIT is developing processes for vertical and stepped openings in 200-mm fused silica or borosilicate glass wafers. Laser-induced etching is used to create through-holes, which are subsequently filled with aluminum, planarized, and polished. Diameters of 60 µm are specified; an additional image also shows feedthroughs approximately 30 µm in diameter in 500 µm-thick glass.

Results:

The glass-based substrates combine low electrical and dielectric losses with integrated feedthroughs and gold electrodes. They provide a technological foundation for larger ion traps and future scalable quantum processors. However, the realization of a larger quantum processor has not yet been demonstrated.

Miniaturized Borescope for Inspecting Aircraft Turbines

Challenge:

Industrial maintenance of aircraft turbines required a miniaturized optical module capable of measuring surface structures inside the combustion chamber. A two-dimensionally scanned green laser beam needed to produce a spot diameter of approximately 100 µm at a distance of around 500 mm. At the same time, the module had to fit into a cylindrical space with an outer diameter of only 7.6 mm.

Our solution:

Fraunhofer ISIT developed a compact optical module with a two-dimensionally scanned laser source and an optically decoupled laser receiver. Initially, a green 520 nm laser diode with 15 mW continuous-wave output power in a compact TO33 package was used. It was later replaced by an externally coupled laser fiber with a customized gradient-index lens. The collimated laser beam is directed via a static deflection unit onto a MEMS mirror mounted at a 30° angle. An optically isolated avalanche photodiode receiver with a green-light filter detects the reflected laser light.

Result:

External coupling of the laser beam improved beam quality over a long working distance and reduced heat input into the optical module. This reduced assembly and calibration effort as well as thermal drift of the MEMS mirror. The concept enables the integration of distance measurement, a MEMS mirror, and an RGB camera into a borescope with a diameter of approximately 8 mm.

Optical Wafer-Level Package with a Defined Internal Atmosphere for MEMS Scanners

Background:

Optical micromirrors require a transparent enclosure with a defined internal atmosphere. In laser scanners, reflections from the glass cover can appear as bright spots in the projected image. At the same time, sufficient clearance must be provided for the moving component.

Our Solution:

Fraunhofer ISIT fabricates inclined and dome-shaped glass covers through three-dimensional micromachining at the wafer level. The geometry redirects reflections away from the projected image, while smooth surfaces reduce stray light. During wafer bonding, a defined atmosphere can be enclosed, such as a vacuum to minimize gas damping.

Results:

The solution encapsulates optical MEMS at the wafer level and combines mechanical clearance with low light scattering and a controlled internal environment.

Glass Domes for Hermetic Encapsulation of Optical MEMS Mirrors

Background:

Moving MEMS mirrors require substantial mechanical clearance and a particle-free vacuum or inert gas atmosphere. Flat covers can limit the deflection angle and cause optical distortion.

Our Solution:

Fraunhofer ISIT developed a glass flow process for fabricating optical glass domes across entire 200-mm wafers. The dome geometry prevents contact with the mirror edges and enables hermetic encapsulation.

Results:

The laser light source demonstrates imaging laser projection for smart glasses. Its volume has been reduced by approximately 98 percent. Generation III has a long edge of 4.5 mm, while Generation II has a long edge of 11 mm.

Ultra-Smooth Spherical Mirrors for Laser Resonators

Background:

Laser resonators require extremely smooth spherical mirrors. Achieving reflectivities exceeding 99.999% and scattering losses below 1 ppm typically requires complex polishing and ion-beam processing techniques.

Our Solution:

Fraunhofer ISIT employs a contactless glass flow process to fabricate spherical optical surfaces across entire wafers. The non-contact shaping process produces exceptionally smooth surfaces that can subsequently be coated with reflective layers.

Results:

Using the glass flow process, mirrors with surface roughness values below 0.6 nm RMS have been fabricated. Individual measurements show values below 0.5 nm RMS. Wafer-based fabrication enables multiple mirrors to be manufactured within a single process.

Miniaturized RGB Laser Light Source for Smart Glasses

Background:

Sports-oriented smart glasses require a compact, rapidly switchable red-green-blue (RGB) laser light source. Its light must be coupled into transparent waveguides integrated into the eyeglass lenses using miniaturized MEMS mirrors.

Our Solution:

Fraunhofer ISIT developed a wafer-level integration platform for the hermetic encapsulation of active laser diodes. The silicon wafer serves as an optical bench. From Generation I to Generation III, the number of optical components was reduced, and the overall package volume decreased from 484 mm³ to 11 mm³.

Results:

The laser light source demonstrates imaging laser projection for smart glasses. Its volume has been reduced by approximately 98 percent. Generation III has a long edge of 4.5 mm, while Generation II has a long edge of 11 mm.

Additional Applications

High-Finesse Optical Resonators

Spherical mirrors fabricated using the glass flow process can be used in high-finesse laser resonators.

One potential application area is quantum technology, particularly optical systems for quantum computers.

Miniaturized Optical Components

Wafer-based fabrication of lenses and mirrors provides a foundation for miniaturized optical systems.

In the future, wafer-level integration may also enable the combination of multiple optical functions into miniaturized lens assemblies.

Glass Domes for MEMS

Three-dimensionally shaped glass domes can be bonded onto MEMS chips.

The hermetic bond protects sensitive structures while maintaining a defined internal pressure or vacuum within the dome.

Interposers and Chiplet Integration

Vertical channels in glass provide the basis for metallized electrical feedthroughs.

Such structures are relevant for glass interposers, which connect chips or chiplets through electrical feedthroughs and redistribution structures.

Quantum Technologies

Precision glass structuring is being investigated for the fabrication of three-dimensional structures in quantum systems. One potential application is the development of 3D ion traps for quantum computers.

High- and Millimeter-Wave Technologies

Glass exhibits low dielectric losses at high frequencies. Combined with vertical electrical feedthroughs, this enables new integration possibilities for low-loss high-frequency structures.

Combining Optical Precision and Microintegration on a Single Material Platform

Glass technology combines different functionalities that would otherwise require separate materials and process chains. Precision optical surfaces, hermetic structures, and vertical microchannels can be fabricated at the wafer level and subsequently further processed to achieve their intended functionality.

Ultra-Smooth Optical Surfaces

During the glass flow process, the optical surface does not come into contact with a forming tool.

This enables the fabrication of exceptionally smooth surfaces. For the mirrors investigated, surface roughness values below 0.5 nm RMS have been reported..

High Form Accuracy of Spherical Structures

The pressure-controlled glass flow process produces spherical surfaces by utilizing the surface tension of the softened glass.

For the mirrors studied, a dimensional accuracy of better than λ/10 RMS was achieved.

Parallel Fabrication of Optical Components at the Wafer Level

Lenses, mirrors, and glass domes are not fabricated exclusively as individual components but as structures within a glass wafer.

This enables multiple optical elements to be fabricated in parallel and subsequently integrated into further wafer-level and packaging processes.

Fabricating Fine Feedthroughs Through Thick Glass

The LIDE process enables the fabrication of fine vertical channels through glass substrates.

The example presented demonstrates through-holes approximately 30 µm in diameter in a 500 µm-thick glass wafer.

Processing Large-Format Glass Wafers

The available LIDE laser system supports both 200-mm and 300-mm wafers. This enables glass structures to be fabricated on wafer formats relevant to future packaging and integration processes.

Further Combining Optical and Electrical Functionalities

The different processes enable a variety of subsequent processing steps. For example, concave mirrors can be coated with reflective layers, feedthroughs can be metallized, and glass domes can be bonded to MEMS devices.

This makes glass technology a common platform for optical, electrical, and microsystem-level functionalities