Touchless Haptic Interfaces

Touchless Haptic Feedback

Challenge:

A touchless human-machine interface required an ultrasonic array with a height of less than 5 mm. The array needed to generate sufficiently strong and precisely controllable sound fields to provide noticeable haptic feedback in mid-air. Existing solutions were based on significantly larger ultrasonic transducers.


Our Solution:

Fraunhofer ISIT developed high-output PMUTs based on AlScN and integrated the transducers into a compact array using flip-chip technology. The transducers operate at approximately 120 to 130 kHz. FPGA-based control electronics drive the individual transducer elements so that the acoustic focus can be shifted both laterally and vertically.


Results:

The demonstrator generated a focused ultrasonic field that produced noticeable touchless haptic feedback at a distance of approximately 2 to 10 cm above the array. This demonstrated the fundamental suitability of compact AlScN PMUT arrays for spatially controllable haptic human-machine interfaces.

For more information:

Your Contact Person

Fabian Stoppel

Contact Press / Media

Dr.-Ing. Fabian Stoppel

Head of Group | Acoustic Systems & Micro Actuators

Fraunhofer Institute for Silicon Technology ISIT
Fraunhoferstraße 1
25524 Itzehoe

Phone +49 4821 17-3594