High- and Ultra-High-Frequency Circuits

Fused-silica interposers for high-frequency circuits up to 100 GHz

Challenge:

Circuits operating in the 100 GHz range require very small structures and low-loss substrates. Conventional manufacturing techniques are not sufficient for this purpose. Quartz glass offers low high-frequency losses.

Our Solution:

Fraunhofer ISIT developed an interposer process based on 200 mm fused-silica wafers. Laser-induced etching is used to create 30 µm diameter through-holes at a 60 µm pitch in 500 µm thick glass. The openings are filled with aluminum, planarized, and supplemented with gold conductor tracks, copper pillars, and tin solder deposits.

Results:

The embedded aluminum feedthroughs enable compact high- and very-high-frequency circuits with dense vertical interconnections. Specific measured insertion or transmission losses are not provided in the available information.

Weitere Informationen:

Techline

Research Projects

Learn more about our related research projects:

APECS 

 

Your Contact Person

Hans-Joachim Quenzer

Contact Press / Media

Hans-Joachim Quenzer

Chief Scientist | Micro-Manufacturing

Fraunhofer Institute for Silicon Technology ISIT
Fraunhoferstraße 1
25524 Itzehoe

Phone +49 4821 17-3551