Ion traps for scalable quantum computers

Advancing Ion Traps from Laboratory Setups to Scalable Quantum Processors

Trapped-ion quantum computers use individual ions as qubits. These systems offer long coherence times and high precision in the execution of quantum operations. However, the technological requirements for ion traps increase significantly as the field advances toward larger, fault-tolerant quantum computers.

More Qubits Require More Complex Trap Architectures

The number of ions that can be accommodated within a single, simple trap is inherently limited. Future architectures will therefore require separate storage, processing, and detection zones between which ions can be moved in a controlled manner.

In addition, multiple ion-trap modules are expected to be interconnected via optical links. This increases not only the number of qubits but also the complexity of the required electrical and optical interfaces.

Compact Integration of Electrical Connections

More complex ion traps require a large number of electrical connections to control the electrode structures. If these connections are routed exclusively laterally from the chip, the required space and integration effort increase substantially as the system grows.

Vertical electrical feedthroughs through the glass substrate are intended to distribute these connections more efficiently and provide additional design flexibility for more complex chip architectures.

Bringing Optical Functions Closer to the Ions

Many optical functions are currently provided by external components. To achieve more compact and scalable systems, waveguides, mirrors, optical elements, and detectors are expected to become increasingly integrated into the ion-trap architecture.

Consequently, combining glass structuring, electrical interconnection, and integrated photonics represents a key technological challenge.

Leveraging Wafer-Level Manufacturing for Higher Production Volumes

Fabricating glass structures on 200-mm wafers enables multiple components to be manufactured in parallel using established microfabrication processes.

This provides a technological foundation for transitioning from individual laboratory setups toward reproducible and scalable manufacturing processes.

Integrating Electrical and Optical Functions Directly into the Ion Trap

Our research focuses on technological integration within the ion-trap chip itself. Rather than providing electrical connections and optical access primarily through external components, these functions are progressively integrated into three-dimensionally structured glass components.

Three-Dimensional Structuring of Ion Traps in Glass

The mechanical foundation consists of a three-dimensionally structured glass ion trap.

Fabrication is performed at the 200-mm wafer level. This enables the production of precise structures for more complex trap geometries using wafer-based microfabrication processes.

Routing Electrical Connections Through the Glass

Vertical electrical feedthroughs are integrated into the glass structure. These through-glass vias (TGVs) are filled with aluminum.

This allows electrical connections to be routed through the substrate rather than requiring all connections to be routed laterally toward the edge of the chip. The objective is to achieve more compact electrical interconnection for increasingly complex electrode structures.

Incorporating Optical Access Directly into the Chip

In addition to electrical feedthroughs, openings for optical access are fabricated in the glass chips.

The objective is to bring optical functions increasingly closer to the actual ion-interaction zones. In the longer term, this also includes the integration of waveguides, optical elements, mirrors, and detectors.

Precisely Connecting Multiple Components

More complex ion traps require reliable bonding of structured glass wafers and optical chips.

To achieve this, we develop and use gold electrode structures and gold stud bumps. The components are joined using thermocompression bonding, in which the metal structures are interconnected under pressure and elevated temperature.

This process can be applied both at the wafer level and to individual chips.

Combining Microfabrication, Electrical Feedthroughs, and Bonding Technologies

The fabrication of integrated ion traps requires several coordinated process steps. To achieve this, we combine glass structuring with metallic electrical interconnects, electrode structures, and technologies for precisely joining multiple components.

Fabricating Glass Structures Using LIDE

Laser-Induced Deep Etching (LIDE) is used to fabricate three-dimensional glass structures and vertical channels.

First, the glass is locally modified using ultrashort laser pulses. The modified regions are then selectively etched. This process enables the fabrication of precise structures and openings for electrical and optical functionalities.

Integrating Aluminum TGVs Directly into the Glass Structure

After the glass is patterned, the electrical vias are filled with high-purity aluminum.

The process developed at ISIT enables aluminum-filled through-glass vias. The vias are hermetically sealed and exhibit very low electrical resistance and high thermal conductivity at cryogenic temperatures.

Fabricating Gold Electrode Structures

Gold structures provide electrical functionality within the ion trap and simultaneously serve as interconnection elements for subsequent integration steps.

This makes it possible to combine electrical contacting with the assembly of the three-dimensional structure.

Thermally Bonding Glass Wafers and Optical Chips

Gold stud bumps are used to bond different components. During thermocompression bonding, the gold structures are joined under pressure and elevated temperature.

The process can be applied to both complete wafers and individual chips, supporting different levels of integration.

Integrated Ion Traps as Building Blocks for Larger Quantum Processors

The technologies under development primarily address the technological scaling of trapped-ion quantum computers. A key challenge is integrating increasingly complex electrical and optical functionalities within a compact chip architecture that can be manufactured reproducibly.

Glass-Based Ion Traps with Integrated Electrical Feedthroughs

Background:

Ion traps for quantum computers must confine and manipulate ions using controllable electric fields. This requires numerous electrical and radio-frequency connections, as well as optical access, within a limited space.

Our Solution:

Fraunhofer ISIT is developing processes for vertical and stepped openings in 200-mm fused silica or borosilicate glass wafers. Laser-induced etching is used to create through-holes, which are subsequently filled with aluminum, planarized, and polished. Diameters of 60 µm are specified; an additional image also shows feedthroughs approximately 30 µm in diameter in 500 µm-thick glass.

Results:

The glass-based substrates combine low electrical and dielectric losses with integrated feedthroughs and gold electrodes. They provide a technological foundation for larger ion traps and future scalable quantum processors. However, the realization of a larger quantum processor has not yet been demonstrated.

Additional Applications:

Modular Ion Traps for Quantum Computers

Three-dimensionally structured glass chips with integrated electrical feedthroughs can serve as the foundation for more complex ion-trap architectures.

In the future, this architecture is intended to support different storage, processing, and detection regions within a single processor.

Optically Networked Quantum Processors

Since the number of ions within an individual module is limited, multiple processors are expected to be interconnected via optical links in the future.

Integrating optical access and additional photonic functionalities into the trap structure represents an important development step toward this goal.

Millenion

Fraunhofer ISIT is contributing its microfabrication and glass technologies to the development of ion traps, including through the European Millenion project.

The project is taking a modular approach with at least 100 qubits and an architecture that is intended to be scaled up to 1,000 qubits in the future.

Interposers and Other Microintegration Applications

The aluminum-filled through-glass vias developed for ion traps are not limited to quantum computing.

Vertical electrical feedthroughs in glass are also relevant for interposers. These substrates connect multiple chips through vertical interconnects and redistribution layers to form complex functional modules.

Integrating More Functionalities Directly into the Chip Architecture

The technological challenge of scalable ion traps extends beyond simply increasing the number of qubits. Electrical interconnection, optics, and mechanical architecture must also scale accordingly. Integrating these functions into the glass structure therefore provides a common technological foundation for more complex and modular quantum processor architectures.

Simplifying Electrical Interconnection

Vertical aluminum TGVs route electrical signals directly through the glass substrate. This eliminates the need to route all electrode connections laterally toward the edge of the ion trap.

This provides additional design flexibility for more complex electrode and trap architectures.

Incorporating Optical Access Directly into the Design

Openings within the glass structure provide optical access at precisely defined locations.

This makes it possible to address electrical and optical requirements simultaneously during the development of the ion-trap chip.

Investigating Interconnections Designed for Cryogenic Conditions

Aluminum exhibits advantageous electrical and thermal properties at very low temperatures.

Consequently, in addition to providing electrical interconnections, TGVs can also contribute to heat dissipation within cryogenic systems.

Modular Interconnection of Components

Thermocompression bonding using gold structures enables the integration of glass structures, electrodes, and optical chips.

The ability to bond both complete wafers and individual chips supports different integration and assembly concepts.

Wafer-Level Manufacturing as a Foundation for Scalability

Fabrication on 200-mm wafers enables multiple structures to be processed in parallel. This represents an important technological step toward transitioning from individual laboratory setups to reproducible manufacturing processes.