Layer and Wafer Structuring, Annealing

Precisely Structure Layers and Protect Surfaces

In layer and wafer patterning, different materials must be selectively removed without adversely affecting the mask, adjacent layers, or the substrate. Material stacks consisting of dielectrics, metals, functional layers, (poly)silicon, and thin or thick dielectrics each require tailored dry or wet etching processes. Depending on the component, isotropic or anisotropic etch profiles, high aspect ratios, and very small or very large apertures in a wide variety of materials are required. At the same time, cleaning, resist removal, and thermal post-treatment must be compatible with the temperature budget of the process chain. The goal is to achieve reproducible geometry with appropriate selectivity and good surface quality relative to the underlying interface. Inappropriate processes can cause profile deviations, material damage, residues, or loss of functionality.

What We Offer

  • Dry etching: Etching of dielectric layers, metals, and hard materials, as well as deep etching of silicon (DRIE); also processes for functional layers, glass, and thick oxide layers.
  • Wet etching for a broad range of materials, as well as spin-etch processes for selected metals.
  • Cleaning: RCA cleaning with SC-1 and SC-2, Piranha cleaning, diluted HF, and DSP and HVS processes.
  • Chemical resist stripping and lift-off.
  • Thermal processes: Annealing and Rapid Thermal Processing (RTP).
  • Project-specific needs analysis, selection of suitable patterning methods and process windows, and their integration with lithography and metrology. Upstream and downstream coating and patterning steps are taken into account holistically.

Equipment & Technology

Process family

Materials / Task

Selected Equipment

Dielectric Etch

Si, SiN, SiO, SiON and other silicon compounds

Applied Materials P5000

Plasma-based metal etching

Al, AlCu, Ti, TiN, Ta, Mo;

 

Applied Materials Centura Metal Etch

Ion beam etching

Ti, Pt, WTi, Cu, FeCoB, AlN, AlScN

Scia Mill 200

GaN Etch

GaN, AlGaN

Applied Materials Centura Metal Etch, KLA fxP

Hard Material Etch

Ta, Pt, SiO, AlScN

STS APS

Silicon DRIE

Deep silicon etching and Bosch processes

SPTS Pegasus;

Lam TCP 9400

Piezoelectric Layers

AlN, AlScN

Applied Materials Centura Metal Etch;

KLA fxP Synapse

Silicon / Glass / Thick Oxides

(D)RIE of Si; glass and thick oxide layers

KLA c2L Rapier;

KLA c2L Synapse

Gas-phase etching

Selective etching of SiO (sacrificial layers, exposure processes)

KLA Primaxx

Wet chemical etching

Si, SiN, SiO, SiON, Al(Sc)N, Glas

Cu, Al, AlCu, WTi, Mo, Ti, TiN, Cr, Au, Ge

Ramgraber tank;

AP&S spin etcher

Annealing

200–1150 °C; 30 Pa to atmospheric pressure

ASM400;

Koyo VF-1000LP

RTP

400–1100 °C

Mattson 2800

Use Cases

  • Deep silicon etching and Bosch processes for the fabrication of MEMS structures.
  • Pattern formation of metallic contact and electrode layers.
  • Pattern formation of AlN/AlScN and other functional layers.
  • Processing of glass and thick oxide layers.
  • Cleaning and stripping processes within integrated process chains.

Advantages

  • Specialized plasma systems for various material classes and structural profiles.
  • Combination of dry etching, wet chemical etching, cleaning, thermal processes, and metrology.
  • Support for individual etching modules as well as complete structure transfer chains.