Heterointegration for Complex Microsystems

Integrating Different Technologies into a Single System

Modern microsystems increasingly combine different functions and components. Sensors, electronic circuits, optical components, and microelectromechanical systems (MEMS) must be reliably interconnected within a confined space.

Heterointegration provides the technological foundation for integrating such diverse materials, components, and manufacturing technologies into a single assembly.

Protecting Sensitive MEMS at the Wafer Level

Delicate microelectromechanical systems (MEMS) require protection from external influences. Some components must also be operated under defined internal pressure or in a vacuum.

Hermetic encapsulation at the wafer level protects the structures before the individual chips are separated and further processed.

Integrating Electrical Connections in Three Dimensions

As integration density increases, electrical contacts must increasingly be routed vertically through substrates.

Interposers made of glass or silicon act as intermediaries between different chips. Electrical through-holes and multilayer rewiring planes create the necessary connections within the system.

Enabling Complex 3D Integration

The challenge extends beyond individual electrical contacts. New applications increasingly require three-dimensional structures made of different materials.

These include, for example, complex glass-silicon structures

Considering Integration at the Wafer, Chip, and Module Levels Collectively

Heterointegration encompasses various levels of system integration. That is why we develop processes ranging from the joining of complete wafers to the manufacture of functional interposers and the assembly of individual chips and components.

Hermetically Encapsulating MEMS at the Wafer Level

Delicate MEMS structures are hermetically encapsulated by bonding a second silicon or glass wafer to them.

Depending on the device and application, we develop and use different bonding processes. The goal is to achieve reliable encapsulation that is also tailored to the functional requirements of the respective device.

Building Three-Dimensional Glass-Silicon Structures

For applications such as ion traps in quantum computers, we are investigating complex three-dimensional structures made of glass and silicon.

This requires the precise joining of different materials and the integration of functional structures within the overall assembly.

Developing Interposers with Vertical Through-Holes

Another area of focus is the development of glass and silicon interposers. These interposers contain electrical vias and multilayer redistribution planes.

Currently, we are focusing in particular on developing Through-Glass Vias (TGV) for complete glass wafers. To achieve this, fine vertical channels are etched into the glass and then filled with aluminum.

Connecting Chips to Functional Modules

Individual chips can be mounted on the resulting conductor tracks and rewiring structures and electrically connected.

This research approach thus combines wafer processing with subsequent packaging and assembly steps to create a compact functional module.

Integrating wafer bonding, glass patterning, and metallization into a single process chain

Heterointegration requires the seamless integration of different manufacturing processes. Our infrastructure combines wafer bonding processes with laser and etching technologies for glass patterning, the metallization of vertical through-silicon vias, and subsequent assembly processes.

Hermetically Encapsulating MEMS with Silicon

Eutectic gold-silicon bonding is one of the methods used for the hermetic encapsulation of inertial sensors.

In this process, a second silicon wafer is bonded to the device wafer. After bonding, the contact areas and wafer edge can be exposed again.

Protecting Optical MEMS with Glass Domes

For devices with optical access, patterned glass wafers can be used as caps.

The glass wafers are hermetically bonded using glass solder. This allows three-dimensional glass domes to protect sensitive structures while simultaneously providing optical access.

Stabilizing Internal Pressure with Getter Materials

Getter materials are used in hermetically sealed cavities. These materials bind residual gases and help maintain low internal pressure over extended periods.

This is particularly relevant for MEMS whose function depends on defined pressure conditions within the cavity.

Creating Electrical Feedthroughs in Glass

For glass interposers, we use Laser-Induced Deep Etching (LIDE). The glass is first locally modified using a femtosecond laser. The modified areas are then removed in a wet chemical process.

Among other systems, we use an LPKF Vitrion S5000 Gen. II, which can process 200-mm and 300-mm glass wafers.

For a 500 µm-thick glass wafer, through-holes with diameters of approximately 30 µm can be fabricated, for example.

Filling Glass Vias with Aluminum

The fabricated channels are subsequently filled with aluminum. For this purpose, molten aluminum is pressed into the glass structures using a specially developed process.

After filling, excess aluminum is removed from the wafer surface. The surfaces are then planarized and cleaned.

This results in vertical electrical interconnects that serve as the foundation for subsequent redistribution and integration processes.

 

Applying Heterogeneous Integration Where Individual Technologies Reach Their Limits

Heterogeneous integration becomes particularly relevant when different functions, materials, and components must work together within a compact system. Depending on the application, the primary requirements may include protection, electrical interconnection, optical access, or three-dimensional integration.

Glass-Based Ion Traps with Integrated Electrical Feedthroughs

Background:

Ion traps for quantum computers must confine and manipulate ions using controllable electric fields. This requires numerous electrical and radio-frequency connections, as well as optical access, within a limited space.

Our Solution:

Fraunhofer ISIT is developing processes for vertical and stepped openings in 200-mm fused silica or borosilicate glass wafers. Laser-induced etching is used to create through-holes, which are subsequently filled with aluminum, planarized, and polished. Diameters of 60 µm are specified; an additional image also shows feedthroughs approximately 30 µm in diameter in 500 µm-thick glass.

Results:

The glass-based substrates combine low electrical and dielectric losses with integrated feedthroughs and gold electrodes. They provide a technological foundation for larger ion traps and future scalable quantum processors. However, the realization of a larger quantum processor has not yet been demonstrated.

Fused Silica Interposers for High-Frequency Circuits up to 100 GHz

Challenge:

Circuits operating in the 100 GHz range require very small structures and low-loss substrates. Conventional manufacturing techniques are not sufficient for this purpose. Quartz glass offers low high-frequency losses.

Our Solution:

Fraunhofer ISIT has developed an interposer fabrication process based on 200-mm fused silica wafers. Through-holes with diameters of 30 µm and a pitch of 60 µm are fabricated in 500 µm-thick glass using laser-induced etching. The openings are filled with aluminum and planarized, followed by the integration of gold conductor traces, copper pillars, and tin solder deposits.

Results:

The embedded aluminum feedthroughs enable compact high- and ultra-high-frequency circuits with dense vertical interconnects.

Additional Applications:

Optical MEMS Systems

Glass caps are suitable for encapsulating sensitive optical MEMS structures, such as MEMS mirrors.

The three-dimensionally shaped caps protect delicate structures from environmental influences while maintaining optical access. Furthermore, with appropriate hermetic encapsulation, the devices can be operated under reduced internal pressure.

Glass Interposers for Highly Integrated Electronics

Glass wafers incorporating vertical electrical feedthroughs can serve as interposers between multiple chips.

Additional redistribution layers enable signals to be routed between components and multiple chips to be interconnected into a single functional module.

High-Frequency Applications

Glass and through-glass via (TGV) technologies can be used to implement integrated high-frequency structures. Potential applications include the fabrication of structures for antennas and other radio-frequency (RF) components.

Quantum Technologies

Complex three-dimensional glass–silicon assemblies provide a technological foundation for applications in quantum systems.

Specific examples include structures for ion traps, in which different materials and functional layers must be precisely integrated with one another.

MEMS and Sensors in Contact with Fluids

Vertical feedthroughs enable electrical connections to be routed through the substrate. This allows electrical contact areas to be spatially separated from regions exposed to liquids or gases.

This approach opens up new integration possibilities for sensors and MEMS devices operating in demanding fluid environments.

Integrating Functions Without Requiring Technological Standardization of All Components

The key advantage of heterogeneous integration lies in the ability to select different materials and components according to their specific functions and subsequently combine them within a common system. Wafer-level packaging, interposers, and vertical electrical feedthroughs provide different approaches to achieving this integration.

Protecting Sensitive Components at an Early Stage

Wafer-level encapsulation protects MEMS structures before singulation and subsequent assembly processes.

Hermetic bonding techniques additionally establish well-defined environmental conditions within the cavity.

Implementing Large Cavities with Optical Access

Three-dimensionally shaped glass caps enable greater cavity heights than conventional planar cap structures.

This creates the potential to hermetically encapsulate more complex assemblies, including structures consisting of multiple components, directly at the wafer level in the future.

Routing Electrical Connections Through Thicker Glass Substrates

The aluminum TGV technology does not require additional sidewall metallization for via filling.

This simplifies the metallization of fine, deep channel structures and offers the potential to achieve smaller via diameters and higher aspect ratios in thicker glass substrates.

Combining Vertical and Lateral Interconnects

TGVs provide electrical connections through the substrate, while multilayer redistribution structures on the wafer surface complement these vertical interconnections.

This enables flexible routing of electrical connections between multiple chips within an interposer.

Developing Solutions from Wafer-Level Integration to Functional Modules

The combination of wafer bonding, glass structuring, via filling, redistribution, and chip assembly enables a comprehensive approach to multiple stages of integration.

This allows interactions between packaging, electrical interconnection, and subsequent module assembly to be considered as early as the process development stage.