Wide-Band Acoustics for Demanding Applications

Combining a Small Footprint with High Performance

Acoustic components need to become smaller, more powerful, and more energy-efficient. At the same time, requirements for frequency range, directivity, sensitivity, and functional integration are increasing. Conventional transducer concepts are increasingly reaching their technical and geometric limits.

Microelectromechanical systems (MEMS) enable new solutions. These include transducer arrays for controlled sound direction, known as beamforming, as well as the integration of multiple transmit and receive functions on a single chip. Multimodal sensor systems and the direct integration of MEMS structures on complementary metal-oxide-semiconductor (CMOS) circuits are also becoming increasingly important.

These requirements affect manufacturers in areas including audio, hearables, medical technology, ultrasound, human-machine interfaces, semiconductor technology, sensing, automation, energy, and measurement technology. Miniaturized acoustic solutions are particularly relevant for companies that require customized components but do not have their own MEMS manufacturing capabilities.

From an Idea to a Customized Transducer

Fraunhofer ISIT develops and manufactures acoustic MEMS transducers tailored to customer-specific requirements. The portfolio ranges from MEMS speakers and microphones to piezoelectric ultrasonic transducers and sensors based on surface acoustic waves.

Feasibility and technology studies help assess new product ideas at an early stage and reduce development risks before a product decision is made. ISIT's 200 mm MEMS manufacturing line is available for prototypes and small-series production.

Industry partners can commission individual process modules or end-to-end development. This includes, for example, the integration of piezoelectric thin-film systems based on aluminum nitride or aluminum scandium nitride, as well as the development and manufacturing of customized MEMS devices.

Collaboration is possible through contract research, bilateral development projects, concept studies, licensing, publicly funded collaborative projects, or long-term development partnerships.

 

Assess the feasibility of a customized acoustic solution

Technology Platforms for Different Acoustic Applications

Fraunhofer ISIT combines MEMS manufacturing processes with piezoelectric and magnetostrictive thin films. These technologies form the basis for specialized technology platforms for audio, ultrasound, and sensor applications.

Piezoelectric Thin Films

Thin films made of aluminum nitride (AlN) and aluminum scandium nitride (AlScN) convert electrical signals into mechanical motion and vice versa. This makes them suitable both for actuators that generate sound and for sensitive sensors.

Piezoelectric multilayer systems enable high actuator performance within a small footprint. They form the basis for powerful MEMS speakers and piezoelectric micromachined ultrasonic transducers (PMUTs). ISIT's PMUT platform supports applications coupled through gases and liquids.

Acoustic Shield Technology

Acoustic Shield technology is designed for ultrasonic and audio transducers with demanding sound pressure level requirements. The design concept reduces unwanted acoustic interactions within the device structure, supporting controlled sound generation.

Surface Acoustic Wave Sensors

Surface acoustic wave sensors, or SAW sensors, use waves that propagate along the surface of a solid material. ISIT functionalizes these sensors with magnetostrictive thin films made of iron-cobalt-boron, among other materials. This enables the detection of changes in magnetic fields.

Manufacturing and Characterization

A 200 mm cleanroom infrastructure with established MEMS and piezo-MEMS processes is available for development and manufacturing. This is complemented by extensive inline metrology for monitoring relevant process and device parameters.

ISIT has more than 15 years of experience with acoustic MEMS and more than 20 years of experience with piezoelectric thin films. Specialized laboratories enable the electrical, mechanical, and acoustic characterization of audio, ultrasound, and SAW devices. This also includes measurements in anechoic environments.

Small Size Enables a Wide Range of Applications

asian man wearing vr headset and control 3d rendering robot hand

Acoustic MEMS transducers combine compact dimensions with application-specific transmit, receive, and sensing functions. This makes them suitable for products and systems across a wide range of industries.

Touchless Haptic Feedback

Challenge:

A touchless human-machine interface required an ultrasonic array with a height of less than 5 mm. The array needed to generate sufficiently strong and precisely controllable sound fields to provide noticeable haptic feedback in mid-air. Existing solutions were based on significantly larger ultrasonic transducers.


Our Solution:

Fraunhofer ISIT developed high-output PMUTs based on AlScN and integrated the transducers into a compact array using flip-chip technology. The transducers operate at approximately 120 to 130 kHz. FPGA-based control electronics drive the individual transducer elements so that the acoustic focus can be shifted both laterally and vertically.


Results:

The demonstrator generated a focused ultrasonic field that produced noticeable touchless haptic feedback at a distance of approximately 2 to 10 cm above the array. This demonstrated the fundamental suitability of compact AlScN PMUT arrays for spatially controllable haptic human-machine interfaces.

MEMS Speakers for In-Ear Headphones

Challenge:

Compact in-ear headphones required a fully integrated solution for audio reproduction. The objective was to eliminate hybrid assemblies with separately mounted components, such as additional membranes, while covering the frequency range and sound pressure levels required for high-quality audio reproduction.

Our Solution:

Fraunhofer ISIT developed a MEMS speaker with piezoelectric thin-film actuators and Open Transducer technology. The 3 × 3 mm chip is designed as a full-range speaker covering a frequency range from 20 Hz to 40 kHz.

Results:

The MEMS speaker developed achieves a sound pressure level of more than 115 dB across its frequency range with distortion of less than 1%. At the same time, it achieves an energy efficiency of up to 134 dB SPL/mW. This demonstrates the combination of a wide frequency range, high acoustic output power, and a small chip area in a single integrated MEMS speaker.

Other potential applications:

Audio and Consumer Electronics

Miniaturized MEMS speakers and microphones can be used in true wireless earbuds, hearing aids, and augmented and virtual reality headsets. Their small size supports compact product designs and the integration of additional functions.

Human-Machine Interfaces

Ultrasonic arrays enable touchless human-machine interfaces. Potential functions include gesture recognition and mid-air haptic feedback. An ultrasonic haptics demonstrator developed by ISIT demonstrates the technical implementation of this approach.

Medical and Industrial Imaging

Piezoelectric ultrasonic transducers are suitable for medical and industrial imaging applications. These also include photoacoustic techniques, in which light pulses generate acoustic signals in the material being examined. ISIT has developed ultrasonic sensor prototypes for these applications.

Environmental and Object Sensing

Ultrasonic sensors can detect distances, movements, and characteristics of their surroundings. This makes them suitable for automated systems, robotics, and future applications involving physically interacting artificial intelligence.

Energy and Measurement Technology

SAW magnetic-field sensors can be used for contactless current measurement and highly dynamic signal detection in switched-mode power supplies. Additional applications include condition monitoring for the continuous monitoring of technical systems.

Smaller, More Efficient, and Functionally Integrated

ISIT's MEMS and thin-film technologies support acoustic components that can deliver high performance despite their small dimensions. Customized designs allow the frequency range, sensitivity, sound pressure level, and directivity to be tailored to the specific application.

High Performance in a Small Footprint

High-performance AlScN thin films, piezoelectric multilayer systems, and specialized device designs enable high actuator and sensor performance within a small footprint. This can reduce the space required for acoustic components.

More Functions on a Single Chip

Multiple transducers or different transducer types can be combined in arrays and integrated transmit-receive systems. This enables multichannel applications, controlled sound fields, and additional sensing functions in compact systems.

High Linearity and Energy Efficiency

High-performance piezoelectric materials enable direct electromechanical conversion. Depending on the design, this can support high linearity and energy-efficient transducer operation.

Scalable Development and Manufacturing

Established technology platforms and 200 mm MEMS manufacturing provide an integrated foundation for development, prototypes, and small-series production. Subsequent transfer to customers or manufacturing partners can already be considered during process development.

Direct Integration with Electronics

With post-CMOS integration, MEMS structures are added after the electronic CMOS circuitry has been fabricated. This approach can combine signal processing and acoustic functions within a small footprint while enabling additional system functionality.

Publications

Download flyers and data sheets on the following topics:

Ultrasonic transducer

SAW

MEMS speaker

 

 

Additional Technologies