(Chem.) Mechanical wafer processing and separation

Precise wafer processing for defined surfaces and geometries

Mechanical wafer processing and chemical-mechanical polishing (CMP) adjust a wafer’s thickness, surface, and geometry to meet the requirements of subsequent processing or characterization steps. During grinding, material must be removed efficiently without causing excessive damage, warping, or breakage. CMP planarization at ISIT enables highly controlled material removal and the planarization of qualified material systems. This process takes into account the different materials as well as contamination classes. During separation via bladedicing, the cutting path, alignment, and mechanical stress must be tailored to the device and substrate. The goals are defined final thicknesses, flat and suitable surfaces, and precisely separated components. Inappropriate processing parameters can cause chipping, cracks, surface damage, dimensional deviations, or reduced component yield.

What We Offer

  • Grinding for thickness reduction of silicon and glass.
  • Semi-automatic and fully automatic blade dicing.
  • IR alignment, ultrasonic-assisted dicing, and circular cutting.
  • CMP in a CMOS-compatible process line, as well as material tracks for Si, SiO, SiC, and GaN.

Equipment & Technology

Technology

Capability

Equipment / Special Features

Grinding

Thickness reduction of silicon and glass;

AlN- and SiC-based substrates

Disco DFG 8540;

Disco DAG 810

Dicing

Semi-automatic and fully automatic blade dicing

Disco DAD3350, DFD6340, 6240; IR alignment, ultrasonic assistance, circular cutting

CMP – CMOS FEOL

CMOS-compatible planarization

Ebara FREX200

CMP – Material track

Si, SiO, GaN; metal-contaminated line

Ebara FREX200

CMP – expanded portfolio

Si, SiO, SiC, GaN; metal-contaminated line

Ebara FREX200

Use Cases

  • Substrate thickness adjustment before, during, and after wafer processing or packaging.
  • Planarization of Si, SiO, SiC, or GaN surfaces.
  • Separation of wafers and devices using IR alignment.
  • Circular cutting or ultrasonic-assisted dicing for special geometries or materials.

Advantages

  • Grinding and CMP as complementary process modules.
  • Support for various materials and contamination classes.
  • On-site integration of wafer processing, debonding, packaging, and characterization.