High-precision silicon membranes make micro- and nanoparticles visible and analyzable in a targeted manner

Precisely Detect, Filter, and Analyze Micro- and Nanoparticles

The reliable analysis of minute particles in liquids and gases is relevant to numerous analytical and industrial applications. Especially when it comes to micro- and nanoparticles, filters must do more than simply trap particles; they must also enable precise analysis, visualization, and classification.

Conventional filters made of polymers or glass microfibers face technical limitations in this regard. Inconsistent filter surfaces make reproducible particle detection difficult. Limited and irregular pore sizes affect filtration. Furthermore, filter materials can interfere with optical or spectroscopic analysis. At higher pressures, sufficient mechanical stability is also required.

The goal of our research is therefore to develop a filter platform in which pore size, pore distribution, membrane thickness, and surface properties can be precisely controlled. At the same time, the position of detected particles on the membrane must remain unambiguously determinable so that different analytical methods can be applied to the same sample.

Developing Silicon Membranes Specifically for Filtration and Particle Analysis

Our research approach combines precisely adjustable pore structures with defined membrane surfaces and the precise localization of particles. In this way, we develop silicon membranes that can be tailored to various filtration and analysis tasks and facilitate further investigation of the retained particles.

Using Silicon as a Precisely Adjustable Diaphragm Platform

Our research approach replaces irregular polymer and glass fiber structures with micromachined silicon membranes. This allows the geometry, surface, and pore structure to be specifically tailored to the intended measurement and filtration tasks as early as the device development stage.

Distribute Pores in a Targeted Manner Rather Than Randomly

A key area of research focuses on the development of regularly arranged pore structures. Using sophisticated silicon etching techniques, defined pore geometries with diameters down to the submicrometer range are created.

In addition to the pore diameter, the shape and dimensions can be tailored to the specific application. As a result, the filter structure itself becomes a specifically designed component of the analytical process.

Jointly Optimizing the Membrane and the Analytical Method

The pore structure is not the only factor that is crucial for the subsequent particle analysis. The membrane’s surface also influences how reliably retained particles can be detected and examined.

That is why we develop various surface treatments and coatings. Depending on the analytical task, dielectric layers as well as aluminum or gold coatings, among others, can be used. The goal is to specifically influence the contrast for the respective analysis and reduce interfering spectral effects.

Retrieving Particles for Multiple Analysis Steps

A high-precision coordinate system can be integrated into the filter interface. This allows defined areas and individual particles on the membrane to be re-located.

This provides a basis for analyzing the same sample using different analytical methods and for spatially correlating the results.

Manufacturing ultra-thin silicon membranes with defined pore structures

The membrane technology is based on micro-fabrication of silicon and precisely controlled etching processes. This allows for the production of regularly arranged pores with precisely defined sizes and geometries.

The membranes are only 2 µm thick. At the same time, the structure is designed to withstand high mechanical stress under pressure.

From development to pilot production on 8-inch wafers

Process development and fabrication take place on an ISO 9001-certified 8-inch wafer line. The existing cleanroom infrastructure makes it possible to further develop the membrane structures beyond individual research prototypes in an industry-standard process environment.

Fabrication can be monitored through microscopic and analytical examinations of the resulting pore structures.

Precise membrane structures for a wide range of filtration and analysis applications

Silicon membrane technology is suitable for applications in which extremely small particles need to be reliably filtered and then specifically analyzed. Defined pore structures and customizable surfaces open up a wide range of applications, from environmental analysis and biological samples to optical and integrated analytical systems.

A membrane platform for filtration and subsequent particle analysis

The combination of defined pores, a homogeneous surface, customizable coatings, and an integrated coordinate system opens up applications in which filtration and subsequent analysis must be closely linked.

Microplastics and Nanoplastics in Environmental Samples

Silicon membranes can be used for the filtration and subsequent analysis of microplastics and nanoplastics in water and other environmental samples. The defined filter surface facilitates the localization and further analysis of retained particles.

Viruses and Contaminants in Biological Samples

The precisely adjustable pore structure opens up applications for the filtration of viruses or contaminants in biological samples.

Filtration of Liquids and Gases

Defined pore structures can be used for analytical filtration tasks in liquids and gases and can be adapted to the respective particle size or measurement task.

Lab-on-Chip-Diagnostics

The miniaturized silicon membrane can be combined with analytical methods in which particles are optically identified and further examined after filtration.

Optical Analysis Systems

Customizable surface coatings offer possibilities for filter systems in which low spectral interference and adequate contrast are important for subsequent optical analysis.

Size is important 2

The publicly funded project “Size is important 2” uses membrane technology for the detection and filtration of microplastics and nanoplastics. The project is funded by the Schleswig-Holstein Ministry of Economic Affairs.

Combining filtration and analysis on a precisely defined membrane

Silicon membranes combine controllable pore structures with homogeneous surfaces and customizable coatings. This allows the membrane to be specifically tailored to various filtration and analytical tasks and supports the reproducible analysis of micro- and nanoparticles.

Defined pores and surfaces improve control over filtration and analysis

A key advantage of silicon membrane technology lies in the precise design of the filter structure. Pore size, arrangement, geometry, surface, and coating can be tailored to the specific analytical task.

Uniform pores instead of irregular filter structures

Microtechnological manufacturing processes enable the creation of regularly spaced pores with precisely adjustable dimensions. This allows filtration to be tailored more specifically to defined particle sizes.

A homogeneous surface for subsequent analysis

The ultra-flat silicon surface creates controlled conditions for optical and other analytical methods. Unlike heterogeneous fiber filters, no irregular fiber structures form on the analysis surface.

Adapt the interface to the analysis method

The membranes can be coated with dielectric materials, aluminum, or gold. This allows the surface to be specifically tailored to different analytical requirements and enables the contrast to be adjusted for each particular analysis.

Combining Multiple Analytical Methods on the Same Sample

An integrated coordinate system makes it possible to locate specific positions on the membrane again. This allows particles to be analyzed one after another using different methods, and the respective results to be correlated.

Membrane structures just 2 µm thick

The ultra-thin membrane combines a thin material thickness with a silicon structure designed to withstand pressure. This enables the development of compact filter structures for demanding analytical applications.

Scalable Manufacturing

Development on an ISO 9001-certified 8-inch wafer line lays the groundwork for the transition from development to pilot production.

Research Project

Learn more about our related research projects:

Size is important 2