Metrology, Characterization, and Reliability

Measuring, Evaluating, and Effectively Securing Processes

Metrology, characterization, and reliability testing provide the data foundation for process control and component evaluation. Depending on the specific application, it may be necessary to determine layer thickness, geometry, surface structure, material properties, electrical characteristics, or behavior under thermal, mechanical, electrical, and environmental stresses. The challenge lies in combining appropriate methods for wafers, chips, and packages and assigning measurement results to the respective process steps. The goal is to achieve a traceable and robust evaluation throughout the entire development chain so that deviations can be detected early and process windows can be validated. Inappropriate or incomplete characterization can leave relevant failure mechanisms undetected and limit the comparability and validity of development and reliability results.

What We Offer

  • Material and Structural Metrology in the Cleanroom: Reflectometry, ResMap, optical inspection, wafer geometry, white-light interferometry, profilometry, CD-SEM, and particle scanning.
  • Analytical Laboratory: AFM, XRD, XRR, SEM, X-ray analysis, XRF, laser microscopy, and 2D/3D X-ray tomography, double-beam laser interferometer (DBLI).
  • Electrical characterization using semi-automatic and fully automatic wafer or chip testers.
  • Reliability and environmental testing, as well as combined electrical-thermal-mechanical tests.

Equipment & Technology

Field

Method / key data

Note

Cleanroom Metrology

Reflectometry, ResMap, optical inspection, wafer geometry, white-light interferometry, profilometry, CD-SEM, particle scan

In-process

Analytical Laboratory

AFM, XRD, XRR, SEM, X-ray analysis, XRF, laser microscopy, 2D/3D X-ray tomography, double-beam laser interferometer (DBLI)

Material and Structural Analysis

Electrical Laboratories

Resistance, capacitance, frequency, and phase angle measurements

Wafer or chip probers, depending on the application

Reliability

Electrical, thermal, and mechanical tests; −70 to 180 °C; 10 to 98% relative humidity; thermal stress up to 1300 °C

Automated and combined tests

Use Cases

  • In-process CD, overlay, profile, and layer inspection.
  • Material analysis and structural characterization.
  • Electrical wafer and chip characterization.
  • Environmental and reliability assessment of components and packages.

Advantages

  • Integration of cleanroom metrology, laboratory analysis, electrical characterization, and reliability testing.
  • Evaluation across the entire development chain rather than isolated individual measurements.
  • Automated and combined testing for components and packages.